UD General Proxy Service

Introduction

Some computers and devices must be kept on a non-routable network, meaning are not able to connect to outside networks, such as the Internet. It is important that these devices be able to get patches and updates. A proxy can allow devices on a non-routable network to connect to an outside network so that they can get patches and updates. The UD general HTTP/HTTPS proxy instance was set up to allow devices with private IP addresses on campus (generally referred to on campus as net 10 or 10.x.x.x IP addresses), to access and download patches and other updates from off-campus. 

A proxy is an intermediary server that acts as a gateway between a user's device and the Internet. When you use a proxy, your Internet traffic is routed through the proxy server before reaching its destination, thus adding an additional layer of security. A good example of proxy server use is a university lab with computers for sensitive research that must be kept secure. 

Important: This proxy service is NOT intended for use on servers, especially those that contain level 2 or 3 data. Instances for server use are forthcoming.

Please also note the following:

  • If your computer is on the same subnet as a server, then it will not be allowed access to the general proxy service.

  • This proxy cannot be used with the UD VPN.

  • This proxy should not be used to connect compromised systems to the network.

  • This proxy should not be used with computers that are out-of-date and therefore security risks, such as Windows XP.

  • The proxy service is not to be used with compromised systems.

  • Logs will be routinely audited to verify that no servers are connecting to the proxy.

How to configure device proxy settings

The service can be used by configuring device HTTP and HTTPS proxy settings as follows:

proxy.escs.udel.edu:5000

How to add the proxy server to your web browser or systems settings

Instructions to set up the proxy server in commonly used web browsers and systems are below.


Apple Safari

  1. In the Safari app on your Mac, click the Safari menu, and choose Settings.
  2. Click Advanced.
  3. Click Change Settings (next to Proxies).
  4. Choose Web proxy (HTTP).
  5. In the Server field, type proxy.escs.udel.edu and In the Port field, type 5000.
  6. Change the Secure web proxy (HTTPS) toggle to on.
  7. In the Server field, type proxy.escs.udel.edu, and In the Port field, type 5000.
  8. Click OK.

Google Chrome

  1. Launch Chrome, select the three dots, and click Settings.
  2. Go to System.
  3. Click Open your computer's proxy settings.
  4. Once redirected, follow the directions for your system's OS:
Windows
  1. Turn the Use a proxy server toggle to On.
  2. Add the following details for the manual proxy server setup/settings: Address: http://proxy.escs.udel.edu and Port 5000
  3. Click Save
Mac
  1. Choose Web proxy (HTTP).
  2. In the Server field, type proxy.escs.udel.edu and In the Port field, type 5000.
  3. Change the Secure web proxy (HTTPS) toggle to on.
  4. In the Server field, type proxy.escs.udel.edu, and In the Port field, type 5000.
  5. Click OK.
Chromebook
  1. Click the panel at the bottom right corner of the screen, and select Settings. Alternatively, click menu - Settings in a Chrome browser windows.
  2. Click the "Manual proxy configuration" radio button. Click the check box to Use the same proxy for all protocols.
  3. In the HTTP proxy field, type http://proxy.escs.udel.edu, and in the Port field, type 5000.
  4. Click the Close button.
Linux
  1. Under Network proxy, choose Manual.
  2. Find your proxy’s protocol in the list provided.
  3. Input the server address: http://proxy.escs.udel.edu and Port 5000.
  4. Exit the box, and you’re done.

Top

Microsoft Edge

  1. From Microsoft Edge, click the three dots, and click Settings
  2. Click System.
  3. Click Open your computer's proxy settings.
  4. Once redirected, turn the Use a proxy server toggle to On
  5. Add the following details for the manual proxy server setup/settings: Address: http://proxy.escs.udel.edu and Port 5000
  6. Click Save
 

Mozilla Firefox

  1. From Mozilla Firefox, click the menu icon () and choose Settings.
  2. In the General section, under Network Settings and next to Configure how Firefox connects to the internet click Settings.....
  3. Click the Manual proxy configuration button. 
  4. In the HTTP proxy field, type http://proxy.escs.udel.edu, and in the Port field, type 5000. Check the Also use this proxy for HTTPS box.
  • Note that if you have configure the proxy server in your OS's system settings, you can choose the Use system proxy settings radio button.
  1. Click OK.
 

Opera

  1. From the launch bar, Open the menu (three dots) in Opera, select Settings and click the Preferences... ...
  2. Scroll until you can click on Advanced.
  3. In the System section, click to Open your computer's proxy settings.
  4. Once redirected, follow the directions for your system's OS:
Windows
  1. Turn the Use a proxy server toggle to OnAdd the following details for the manual proxy server setup/settings: Address: http://proxy.escs.udel.edu and Port 5000
  2. Click Save
Mac
  1. Choose Web proxy (HTTP).
  2. In the Server field, type http://proxy.escs.udel.edu.
  3. In the Port field, type 5000.
  4. Click OK.
Linux
  1. Under Network proxy, choose Manual.
  2. Find your proxy’s protocol in the list provided.
  3. Input the server address: http://proxy.escs.udel.edu and Port 5000.
  4. Exit the box, and you’re done.

Top

Adding the proxy server to a Chromebook

  1. Click the panel at the bottom right corner of the screen, and select Settings. Alternatively, click menu - Settings in a Chrome browser windows.
  2. Click the "Manual proxy configuration" radio button. Click the check box to Use the same proxy for all protocols.
  3. In the HTTP proxy field, type http://proxy.escs.udel.edu, and in the Port field, type 5000.
  4. Click the Close button.

Details

Article ID: 1061
Created
Thu 10/26/23 8:45 AM
Modified
Mon 2/5/24 11:22 PM